XRA1207

16-Bit I²C/SMBus GPIO Expander with Integrated Level Shifters

Description

The XRA1207 is a 16-bit GPIO expander with an I2C/SMBus interface. After power-up, the XRA1207 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

In addition, the GPIOs on the XRA1207 can individually be controlled and configured. As outputs, the GPIOs can be outputs that are high, low or in three-state mode. The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander.

As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted. The interrupt can be programmed for different behaviors. The interrupts can be programmed to generate an interrupt on the rising edge, falling edge or on both edges. The interrupt can be cleared if the input changes back to its original state or by reading the current state of the inputs.

The XRA1207 is an enhanced version of the TCA6416. The XRA1207 is pin and software compatible with the TCA6416.

The XRA1207 is available in 24-pin QFN and 24-pin TSSOP packages.

For technical support or to obtain an IBIS model for this product, please email Exar's UART Technical Support group.

Read More

Features

  • 1.65V to 3.6V operating voltage
  • 16 General Purpose I/Os (GPIOs)
  • 5V tolerant inputs
  • Maximum stand-by current of 1uA at +1.8V
  • I²C/SMBus bus interface
    • I²C clock frequency up to 400kHz
    • Noise filter on SDA and SCL inputs
    • Up to 4 I²C Slave Addresses
  • Individually programmable inputs
    • Internal pull-up resistors
    • Polarity inversion
    • Individual interrupt enable
    • Rising edge and/or Falling edge interrupt
    • Input filter
  • Individually programmable outputs
    • Output Level Control
    • Output Three-State Control
  • Open-drain active low interrupt output
  • Active-low reset input
  • Pin and software compatible with TCA6416
  • 3kV HBM ESD protection per JESD22-A114F
  • 200mA latch-up performance per JESD78B

Documentation

Schematics

Schematics

Product Brochure

Interface Brochure

Application

  • Personal Digital Assistants (PDA)
  • Cellular Phones/Data Devices
  • Battery-Operated Devices
  • Global Positioning System (GPS)
  • Bluetooth

Design Tools

Packaging

Pkg Code Details Quantities Dimensions PDF
TSSOP24
  • JEDEC Reference: MO-153
  • MSL Pb-Free: L1 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 83.8ºC/W
  • Bulk Pack Style: Tube
  • Quantity per Bulk Pack: 62
  • Quantity per Reel: 2500
  • Quantity per Tube: 62
  • Quantity per Tray: n/a
  • Reel Size (Dia. x Width x Pitch): 330 x 16 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 7.8
  • Width: 4.4
  • Thickness: 1.2
  • Lead Pitch: 0.65
QFN16 3x3
  • JEDEC Reference: MO-220
  • MSL Pb-Free: L1 @ 260ºC
  • MSL SnPb Eutectic:
  • ThetaJA: 36.4ᵒC
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 490
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 3.0
  • Width: 3.0
  • Thickness: 1.00
  • Lead Pitch: 0.5

Parts & Purchasing

Part Number Pkg Code RoHS Min Temp Max Temp Status Buy Now Order Samples
XRA1207IG24-F TSSOP24 OBS Suggested:
XRA1201IG24TR-F
XRA1207IG24TR-F TSSOP24 OBS Suggested:
XRA1201IG24TR-F
XRA1207IL24-F QFN16 3x3 OBS
XRA1207IL24TR-F QFN16 3x3 OBS
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Quality Documents

Part NumberREACH
XRA1207IG24-FDownload
XRA1207IG24TR-FDownload
XRA1207IL24-FDownload
Additional Quality Documentation may be available, please contact customersupport@exar.com.
Distribution Date Description File
07/12/2017 Product Discontinuation Notice PDN_17-0626-01-1033.pdf
07/11/2017 Product Discontinuation Notification PDN_17-0623-01-1033.pdf
05/10/2017 Qualification of alternate assembly subcon, JCET. PCN 17-0208-03 JCET-1033.pdf
02/15/2017 Qualification of alternate assembly subcon, ANST. PCN 16-1149-02 ANST-1033.pdf
01/27/2017 Qualification of alternate assembly subcon, ANST, China. PCN 16-1145-04-01 ANST-1033.pdf
04/02/2014 Qualified UTAC Thailand for assembly using copper wire or gold wire bonding assembly, in addition to the current qualified gold wire bonding assembly sites, Unisem Batam and UTAC China. Material change and alternate assembly site. PCN_13-0729-02-1033.pdf

Frequently Asked Questions

The best way to determine this is to go to exar.com and type the part into the search function. At or near the top of the results you should see something that looks like
 
 

In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:

 
 

Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:

 

Notice the status column and the “Show obsolete parts” link:

 

A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:

 
 

Another method to find out if a part is OBS or EOL is to click on SUPPORT:

 

And then Product Change Notifications

 
 

Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:

 
 

If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.

Didn't find what you are looking for? Click here to post a new question.