XRP7720

Quad Output Universal Customizable PMIC with PFM
Data Sheets OBS (Obsolete)

Overview

Information Quad Output Universal Customizable PMIC with PFM
# of Outputs 4
VIN MIN (V) 4.75
VIN MAX (V) 18
VOUT MIN (V) 0.6
VOUT MAX (V) 0.9*Vin
Set Point Resolution (mV) 2.5
Controller/ Regulator Controller
Gate Drive Pull Up/Down 4ohm / 2ohm
Internal MOSFETs No
IQ (mA) 4
Programmable Frequency Range (MHz) 0.1 to 1.2
Control Technology 17 bit DPWM/DPFM
NVM Technology Flash
Junction Temp Range (°C) -40 to 125
Package TQFN44
Special Features Pre-programmed only
PowerArchitect Version# 5
Additional Features XRP7724 Pin compatible without I2C
Show more

The XRP7720 is a quad output universal customizable PMIC comprised of a quad channel Digital Pulse Width Modulated (DPWM) step-down (buck) controller and 5V LDO. A wide 4.75V to 5.5V and 5.5V to 18V input voltage dual range allows for single supply operation from standard power rails. It is pin compatible to the popular XRP7724 and provides full flexibility during the development phase while offering a cost effective option for high volume production units.

With integrated FET gate drivers, it can operate from 105kHz to 1.23MHz with independent channel-to-channel programmable operating frequency, the XRP7720 reduces overall component count and solution footprint while optimizing conversion efficiencies. A selectable Digital Pulse Frequency Mode (DPFM) and low operating current result in better than 80% efficiency down to 10mA load provides support for portable and Energy Star compliant applications. Each XRP7720 output channel is individually programmable down to a minimum 0.6V with a resolution of 2.5mV, and configurable for precise soft-start and soft-stop sequencing, including delay and ramp control.

During development, the XRP7720ILB-DEV is configured using PowerArchitectTM 5.1 (PA 5.1) through an I2C interface, allowing for short development of the power system and short time-to-market for the entire system. Once development is completed and volume production is ready to commence, Exar will assign a unique part suffix and deliver a customized XRP7720.

Built-in independent output overvoltage, over temperature, overcurrent and undervoltage lockout protections ensure safe operation under abnormal operating conditions.

The XRP7720 is offered in a RoHS compliant, “green”/halogen free 44-pin TQFN package.

  • Pin compatible to XRP7724
    • SMBus compliant I2C interface available on XRP7720ILB-DEV only
  • Supported by PowerArchitect™ Design and Configuration Software
    • XRP7720ILB-DEV only
  • Quad channel step-down controller
      Digital PWM 105kHz to 1.23MHz operation
    • Individual channel frequency selection
    • Patented digital PFM with ultrasonic mode
    • Integrated MOSFET drivers
    • Programmable 5 coefficient PID control
  • 4.75V to 18V input voltage
    • 4.75V-5.5 and 5.5V-18V input range
    • 0.6V to 5.5V output voltage
  • 3 x 15V capable PSIOs + 2 x GPIOs
  • Full start/stop sequencing support
  • Built-in thermal, overcurrent, UVLO and output overvoltage protections
  • On board 5V standby LDO
  • 7x7mm TQFN44 package

  • Blade servers
  • Micro servers
  • Network adapter cards
  • Switches/routers
  • Video surveillance systems

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XRP7720 Quad Output Universal Customizable PMIC with PFM 1.0.0 January 2014 1.3 MB
Application Notes ANP-38, XRP7724 I2C Command Set and Programming Guide R00 July 2019 2.5 MB
Application Notes ANP-39, Loading XRP7724 RAM with Runtime Intel HEX File 1.1.0 January 2014 1.1 MB
Application Notes ANP-43, XRP772X Current Measurement Application Note 1.0.1 December 2013 744.3 KB
Application Notes ANP-32, Practical Layout Guidelines for PowerXR Designs 1.1.0 October 2012 1.5 MB
Application Notes ANP-35, XRP77XX: Extending the MOSFET Gate Drive Conductors 1.0.0 May 2011 2 MB
User Guides & Manuals XRP77xxEVB-XCM-V62 (Configuration Module) 1.0.1 October 2017 880.5 KB
User Guides & Manuals XRP7720/7724/7725EVB-DEMO-1 Evaluation Board Manual 2.0.0 January 2014 3.8 MB
Product Flyers Universal PMICs April 2019 2 MB
Product Brochures Power Management Brochure October 2020 2.4 MB
PowerArchitect PowerArchitect
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Pkg Code Status Suggested Replacement PDN
XRP7720ILB-DEV-F TQFN44 7x7 OBS
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions PDF
TQFN44 7x7
  • JEDEC Reference: MO-220
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 30.2ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 260
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 260
  • Reel Size (Dia. x Width x Pitch): 330 x 16 x 12
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 7.00
  • Width: 7.00
  • Thickness: 0.8
  • Lead Pitch: 0.50

Notifications

Distribution Date Description File
07/11/2017 Product Discontinuation Notification

FAQs & Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Submit a Technical Support Question As a New Question

Visit the product page for the part you are interested in.  The part's status is listed in the Parts & Purchasing section.  You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
 
To visit a product page, type the part into the search window on the top of the MaxLinear website.
 
In this example, we searched for XRA1201.  Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts". 
 
 
 

 

  

The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product.  Click Show obsolete parts, to see all EOL or OBS products.

 
 
 

 

For best gate drive performance, it is recommended to route GL_RTN (PGND) together with its GL pin like a differential pair instead of just connecting GL_RTN to GND at the IC and subjecting it to ground noise. Routing them together cancels out any noise, inductive and electromagnetic field effects between these two traces. See ANP-32 Practical Layout Guidelines for PowerXR Designs http://www.exar.com/appnote/anp32 page 8 for more information.