XRP7714

Programmable Power Management Systems

Description

The XRP7714 is a quad-output Pulse-Width Modulated (PWM) step-down DC/DC controller with a built-in LDO for standby power and GPIOs. The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface. Independent Digital Pulse Width Modulator (DPWM) channels regulate output voltages and provide all required protection functions such as current limiting and overvoltage protection.

Each output voltage can be programmed from 0.9V to 5.1V without the need of an external voltage divider. The wide range of the programmable DPWM switching frequency (from 300kHz to 1.5MHz) enables the user to optimize between efficiency and component size. Input voltage range is from 4.75V to 25V. An I2C bus interface is provided to program the IC as well as to communicate with the host for fault reporting and handling, power rail parameters monitoring, etc.

The device offers a complete solution including independently programmable: soft-start, soft-stop, start-up delay and ramp of each PWM regulator.

The Exar Configuration Model XR77xxEVB-XCM-V80 interface board provides designers with a simple, quick and inexpensive means of evaluating and prototyping new designs using Programmable Universal PMIC devices with PowerArchitect4. This Evaluation Board is designed only for low volume engineering purposes; not production volumes. For production requirements commercial programmers must be used. The Evaluation Board is provided “as is and whereas” and without any warranty as to results, merchantability or purpose. Exar is not responsible for misuse of the Evaluation Board.

Read More

Features

  • 4 channel step-down controller
    • Programmable output voltage 0.9V to 5.1V
    • Programmable 1.5MHz DPWM frequency
    • Integrated FET drivers
  • 4.75V to 5.5V and 5.5V to 25V input voltage range
  • Up to 6 reconfigurable GPIO pins
  • Fully programmable via I2C interface
  • Independent Digital Pulse Width Modulator (DPWM) channels
  • Complete monitoring and reporting
  • Complete power up/down sequencing
  • Full on board protection OTP, UVLO, OCP and OVP
  • Built-in 3.3V/5V LDO
  • PowerArchitect™ Design and Configuration Software
  • Green/Halogen free 40-pin TQFN

 

Find out more about the Zynq Reference Design.

Application

  • Multi-channel programmable power supplies
  • Audio-video equipment
  • Industrial and telecom equipment
  • Processors and DSP based equipment

Design Tools

Evaluation Hardware and Software

Packaging

Pkg Code Details Quantities Dimensions PDF
TQFN40 6x6
  • JEDEC Reference: MO-220
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 18.1ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: n/a
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 16 x 12
  • Tape & Reel Unit Orientation: Pin 1 at sprocket hole.
  • Dimensions: mm
  • Length: 6.00
  • Width: 6.00
  • Thickness: 0.75
  • Lead Pitch: 0.50

Parts & Purchasing

Part Number Pkg Code RoHS Min Temp Max Temp Status Buy Now Order Samples
XRP7714ILB-0X10-F TQFN40 6x6 Active
XRP7714ILB-0X14-F TQFN40 6x6 Active
XRP7714ILB-0X18-F TQFN40 6x6 Active
XRP7714ILB-0X1C-F TQFN40 6x6 Active
XRP7714ILB-F TQFN40 6x6 Active
XRP7714ILBTR-F TQFN40 6x6 Active
XRP7714EVB-DEMO-3-KIT Kit Active
XRP7714EVB-ZYNQ-1-KIT Kit Active
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Distribution Date Description File
01/05/2017 Addition of an alternate qualified location, ANST, China. PCN 16-0835-01 ANST-1033.pdf
12/14/2015 Product Discontinuation Notification PDN 15-0729-02-02-1033.pdf
10/25/2010 Datasheet change. Input voltage range as originally defined could not be guaranteed from lot to lot. Additional information & typographical errors. PCN_10-1022-02-1033.pdf
10/15/2010 Package/Shipping Change: New carrier tape dimension. Standardization. PCN_10-1011-01-1033.pdf