XRT75R03

Multi-Channel Line Interface Unit (LIU) Family Desynchronizer and Jitter Attenuator with R³ Technology™

Description

Recognized for an already robust series of physical layer, access and metro products, Exar extends its capabilities by adding to the industry's first monolithic desynchronization solution for mapping/demapping from SONET/SDH (synchronous) to DS3/E3 (asynchronous), R3 TechnologyTM.

Exar's R3 TechnologyTM was first introduced in 2002 as a breakthrough capability delivering key benefits to customers designing interface cards. Devices utilizing the technology are Reconfigurable with integrated clock synthesizer supporting DS3/E3/STS-1 clock rates from a single clock source. This capability enables customers to build one board with a single bill-of-materials, and gives them the agility to quickly respond and reconfigure devices for compressed design cycles. In addition, the series employs Relayless Redundancy eliminating the need for external relays for 1:1 and 1+1 applications by establishing a back-up channel that can be brought on-line in the event of failure.

The first T3/E3/STS-1 products to offer R3 TechnologyTM are the XRT75R03D (three) and XRT75R12D (twelve) Previously, Exar has offered this capability only on its T1/E1 LIU products. Now customers doing T3/E3 designs can take advantage of this unique technology saving time and cost in implementing redundancy as well as supporting global standards for Telecom.

 

Product Highlights

The XRT75Rxx series has an independent receiver, transmitter and jitter attenuator in a single 52-pin TQFP package. It supports E3 (34.368.Mbps), DS3 (44.736Mbps) and STS-1 (51.84 Mbps) operations, has a differential receiver that provides a high noise interference margins -- capable of receiving data from cables of over 1,000 feet, or up to 12dB of cable attenuation. The device has an onboard Pseudo Random Binary Sequence (PRBS) generator and detector that can insert and detect single bit errors. This function is often used for diagnostic purposes. In addition, Exar adds desynchronization capability in its XRT75RxxD family.

 

What is Clock Desynchronization?

The process of mapping and subsequent de-mapping of DS3/E3 signals into SONET introduces excessive jitter and timing irregularities. Examples of jitter sources include mapping jitter, caused by bit justification, or stuffing, and pointer jitter, the outcome of frequency mismatches between networks that causes pointer movement. Current desynchronizing solutions use both a very narrow-bandwidth crystal oscillator based Phase Locked Loop (PLL) referred to as a Voltage Control Oscillator (VCXO), and a deep FIFO for each data rate and channel. For multi-channel/multi-rate applications, chip requirements can rise at exponential levels driven by the number of supported rates and channels. Enter Exar's solution; it uses only one highly integrated programmable PLL, now each channel can support multi-rate (DS3, E3 or STS-1) operations. Here jitter/timing irregularities are removed, and then desynchronized to provide a smooth GR-253-CORE specification-compliant clock signal. Once this operation is complete the signal is suitable for retransmission and returned to the data stream.

 

Standard's Compliance

The receiver, transmitter, and jitter attenuator all meet Bellcore GR-499 CORE requirements. Also, the transmitter meets the GR-253 CORE and ANSI T1.102 specifications, and it includes a duty cycle correction PLL. The device meets jitter and wander specifications described in the T1.105.03b, and ETSI TBR-24, and is compliant with jitter transfer templates outlined in ITU G.751, G.752 and G.755.

Read More

Features

Receiver:
  • On-Chip Clock and Data Recovery Circuit for High-Input Jitter Tolerance
  • On-Chip B3ZS/HDB3 Encoder/Decoder Can be Disabled or Enabled
  • Able to receive data over 1000 feet of cable with up to 12 dB of cable attenuation
Transmitter:
  • Tri-state Transmit Output Capability for Redundancy Applications
  • Transmitter Can be Turned On or Off
Jitter Attenuator
  • Jitter Attenuator Can be Selected in Receive or Transmit Paths
  • Selectable FIFO Size of 16 or 32 Bits
Control and Diagnostics
  • Five Wire Serial Microprocessor for Control and Configuration
  • Supports Optional Internal Transmit Driver Monitoring
  • Reconfigurable relayless redundancy
  • Pb-Free, RoHS Compliant Versions Offered

Application

  • E3/DS3 Access Equipment
  • STS-1-SPE to DS# Mapper
  • DSLAMs
  • Digital Cross Connect Systems
  • CSU/DSC Equipment
  • Routers
  • Fiber Optic Terminals

Design Tools

Simulation Models
Package Type Vcc Temp Mode Version File
TQFP 3.3V Industrial 2

Packaging

Pkg Code Details Quantities Dimensions PDF
LQFP128 14x20
  • JEDEC Reference: MS-026
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 43ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: n/a
  • Quantity per Reel: 750
  • Quantity per Tube: n/a
  • Quantity per Tray: 72
  • Reel Size (Dia. x Width x Pitch): 330 x 44 x 24
  • Tape & Reel Unit Orientation: Pin 1 at sprocket hole.
  • Dimensions: mm
  • Length: 14.00
  • Width: 20.00
  • Thickness: 1.60
  • Lead Pitch: 0.50

Parts & Purchasing

Part Number Pkg Code RoHS Min Temp Max Temp Status Buy Now Order Samples
XRT75R03IV OBS Suggested:
XRT75R03IV-F
XRT75R03IV-F LQFP128 14x20 -40 85 EOL Suggested:
XRT73LC03AIV-F
XRT75R03IVTR OBS Suggested:
XRT75R03IVTR-F
XRT75R03IVTR-F OBS Suggested:
XRT75R03IV-F
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Distribution Date Description File
12/02/2018 Product Discontinuation Notice PDN-18008 XRT75R03IV-F-1033.pdf
07/12/2017 Product Discontinuation Notice PDN_17-0626-01-1033.pdf
07/26/2016 Product discontinuation notification. Discontinued. PDN 16-0626-01-1033.pdf
12/05/2013 Addition of an alternate qualified assembly site, ASE Chung-Li (Taiwan) for assembly using copper or gold wire bonding. Material change and alternate assembly site. PCN_13-0521-02-1033.pdf
10/03/2013 Product Discontinuation Notification Discontinued. PDN_13-1003-01-1033.pdf
03/19/2013 Product Discontinuation Notification Discontinued. PDN_13-0315-01-1033.pdf

Frequently Asked Questions

The best way to determine this is to go to exar.com and type the part into the search function. At or near the top of the results you should see something that looks like
 
 

In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:

 
 

Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:

 

Notice the status column and the “Show obsolete parts” link:

 

A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:

 
 

Another method to find out if a part is OBS or EOL is to click on SUPPORT:

 

And then Product Change Notifications

 
 

Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:

 
 

If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.

Didn't find what you are looking for? Click here to post a new question.