Overview
Information | 8-bit, 180MSPS, Triple Video DACs |
---|---|
# of Channels | 3 |
Resolution (bits) | 8 |
Conversion Rate (MWPS) | 180 |
DLE (%/FS) | ±0.5 max (LSB) |
ILE (%/FS) | ±0.5 max (LSB) |
Power Dissipation (mW) | 300 |
Min VS (V) | 3 |
Max VS (V) | 3.6 |
Temperature Range (°C) | -40 to 125 |
Package | TQFP-48 |
Settling Time (ns) | 2.5 |
CDK3405 is a low-cost triple D/A converters that are tailored to fit graphics and video applications where speed is critical. CMOS-level inputs are converted to analog current outputs that can drive 25-37.5Ω loads corresponding to doubly-terminated 50-75Ω loads. A sync current following SYNC input timing is added to the IOG output. BLANK will override RGB inputs, setting IOG, IOB and IOR currents to zero when BLANK = L. Although appropriate for many applications, the internal 1.25V reference voltage can be overridden by the VREF input. Few external components are required, just the current reference resistor, current output load resistors, bypass capacitors, and decoupling capacitors.
- 8-bit resolution, 180MSPS
- ±2.5% gain matching
- ±0.5% linearity error
- Sync and blank controls
- 1.0Vpp video into 37.5Ω or 75Ω load
- Internal bandgap voltage reference
- Low glitch energy
- Single 3.3V power supply
- Pin compatible to ADV7125
- RGB Video signal conversion
- YCBCR Video signal conversion
- Composite, Y, C Video signal conversion
- Multimedia systems
- Image processing
- PC Graphics
- Projectors
Documentation & Design Tools
Type | Title | Version | Date | File Size |
---|---|---|---|---|
Data Sheets | CDK3405 8-bit, 180MSPS, Triple Video DAC | 1C | December 2013 | 927.1 KB |
Parts & Purchasing
Part Number | Pkg Code | Min Temp | Max Temp | Status | Suggested Replacement | PDN |
---|---|---|---|---|---|---|
CDK3405ATQ48 | TQFP48 | -40 | 125 | OBS | ||
CDK3405CTQ48 | TQFP48 | 0 | 70 | OBS |
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.