XRT73L02M

2-Channel DS3/E3/STS-1 Line Interface Unit
Data Sheets OBS (Obsolete)

Overview

# of Channels 2
Data Rate(s) DS3, E3, STS-1
Clk Rec Yes
SH/LH n/a
Temperature Range (°C) Ind.
Op Pwr Sup/Max Cur 3V ±5%
Package TQFP-80
Show more

The XRT73L02M is a two-channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications. It incorporates independent Receivers, Transmitters in a single 100 pin TQFP package.

The XRT73L02M can be configured to operate in either E3 (34.368 MHz), DS3 (44.736 MHz) or STS-1 (51.84 MHz) modes.The transmitter can be turned off or tri-stated for redundancy support and for conserving power.

The XRT73L02M’s differential receiver provides high noise interference margin and is able to receive the data over 1000 feet of cable or with up to 12 dB of cable attenuation.

The XRT73L02M provides both Serial Microprocessor Interface as well as Hardware mode for programming and control.

The XRT73L02M supports local, remote and digital loop-backs. The XRT73L02M also contains an on-board Pseudo Random Binary Sequence (PRBS) generator and detector with the ability to insert and detect single bit error.

Receiver:

  • On chip Clock and Data Recovery circuit for high input jitter tolerance
  • Meets the jitter tolerance requirements as specified in ITU-T G.823_1993 for E3 and Telcordia GR-499-CORE for DS3 applications
  • Detects and Clears LOS as per G.775
  • Receiver Monitor mode handles up to 20 dB flat loss with 6 dB cable attenuation
  • On chip B3ZS/HDB3 encoder and decoder that can either be enabled or disabled
  • On-chip clock synthesizer generates the appropriate rate clock from a single frequency XTAL
  • Provides low jitter clock outputs for either DS3, E3 or STS-1 rates
  • On-chip clock synthesizer provides the appropriate rate clock from a single 12.288 MHz Clock
  • Provides low jitter output clock
Transmitter:
  • Compliant with Bellcore GR-499, GR-253 and ANSI T1.102 Specification for transmit pulse
  • Tri-state Transmit output capability for redundancy applications
  • Transmitter can be turned on or off
Control and Diagnostics:
  • 5 wire Serial Microprocessor Interface for control and configuration
  • Supports optional internal Transmit Driver Monitoring
  • PRBS error counter register to accumulate errors
  • Hardware Mode for control and configuration
  • Supports Local, Remote and Digital Loop-backs
  • Single 3.3 V ± 5% power supply
  • 5V Tolerant I/O
  • Available in 100 pin TQFP
  • -40°C to 85°C Industrial Temperature Range
  • Pb-Free, RoHS Compliant Versions Offered

  • E3/DS3 Access Equipment
  • STS1-SPE to DS3 Mapper
  • DSLAMs
  • Digital Cross Connect Systems
  • CSU/DSU Equipment
  • Routers
  • Fiber Optic Terminals

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XRT73L02M TWO Channel E3/DS3/STS-1 Line Interface Unit 1.0.0 May 2003 668.6 KB
Application Notes TAN-200, MaxLinear APIs - OS Portability 1.0.0 August 2007 88.5 KB
Application Notes TAN-075, DS-3/E3 LIU Layout Recommendations 1.0.0 February 2007 29.8 KB
Application Notes TAN-025, Interfacing the Microprocessor Serial Interface of the XRT730X Family of DS3/E3/STS-1 LIU Devices to the SPI Port of the MC68360 QUICC Device 1.3 July 2004 16 KB
Simulation Models
Package Type Vcc Temp Mode Version File
TQFP 3.3V Industrial 3
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Quality & RoHS

Part Number RoHS | Exempt RoHS Halogen Free REACH TSCA MSL Rating / Peak Reflow Package
XRT73L02MIV-F N Y Y Y Y L3 / 260ᵒC TQFP100

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement PDN
XRT73L02MIV-F LQFP100 -40 85 OBS XRT75L04IV-F
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
LQFP100
  • JEDEC Reference: MS-026
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 45.7ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: n/a
  • Quantity per Reel: 1000¹
  • Quantity per Tube: n/a
  • Quantity per Tray: 90
  • Reel Size (Dia. x Width x Pitch): 330 x 24 x 20
  • Tape & Reel Unit Orientation: Pin 1 at sprocket hole.
  • Dimensions: mm
  • Length: 14.00
  • Width: 14.00
  • Thickness: 1.60
  • Lead Pitch: 0.50

Notifications

Distribution Date Description File
06/09/2021 Product Discontinuation Notice
04/04/2017 Qualification of alternate assembly subcon, Greatek, Taiwan.
07/26/2016 Product discontinuation notification. Discontinued.
07/18/2014 Elimination of back mark. Eliminate back mark; consolidate information in top mark.
12/05/2013 Addition of an alternate qualified assembly site, ASE Chung-Li (Taiwan) for assembly using copper or gold wire bonding. Material change and alternate assembly site.
10/03/2013 Addition of an alternate qualified assembly site, ASE Chung-Li (Taiwan). Material change and alternate assembly site.

FAQs & Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Submit a Technical Support Question As a New Question

Visit the product page for the part you are interested in.  The part's status is listed in the Parts & Purchasing section.  You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
 
To visit a product page, type the part into the search window on the top of the MaxLinear website.
 
In this example, we searched for XRA1201.  Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts". 
 
 
 

 

  

The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product.  Click Show obsolete parts, to see all EOL or OBS products.

 
 
 

 

The -F suffix indicates ROHS / Green compliance:
https://www.exar.com/quality-assurance-and-reliability/lead-free-program