XR77103-A0R5

Universal PMIC 3 Output Buck Regulator
Order Now

Overview

Information Universal PMIC 3 Output Buck Regulator
# of Outputs 3
VIN MIN (V) 4.5
VIN MAX (V) 14
VOUT MIN (V) 0.8
VOUT MAX (V) 6
Set Point Resolution (mV)
Controller/ Regulator Regulator
Gate Drive Pull Up/Down 3A / 2A / 2A
Internal MOSFETs Yes
IQ (mA) 1.5
Programmable Frequency Range (MHz) 0.5
Control Technology Current Mode PWM/PSM
NVM Technology Pre-Programmed
Junction Temp Range (°C) -40 to 125
Package TQFN-32
Special Features -
PowerArchitect Version# N/A
Additional Features Light Load PFM, Enable, Over Current Protection, Power Good, Power Sequencing, Synchronous Rectification, Thermal Shutdown, UVLO, Phase Interleaving, Clock Sync, Soft Start Built-in
Show more

The XR77103-A0R5 step-down regulator features three 2A synchronous high efficiency buck regulators with integrated power switches. They can operate in 5V, 9V and 12V powered systems with minimal required external component thus providing the smallest size solution possible.  Two of the outputs may be paralleled for output currents up to 5A peak with steady state current of up to 4A.

The output voltage of each converter can be adjusted by external resistor divider down to voltage as low as 0.8V.  With a nominal switching frequency of 500kHz, the regulators can also be synchronized to an external clock in applications where EMI control is critical.

XR77103-A0R5 features a supervisor circuit that monitors each converter output.  PGOOD pin is asserted once sequencing is done, outputs are reported in regulation and the reset timer expires.  The polarity of the signal is active high.  A Pulse Skipping Mode (PSM) reduces switching losses maintaining high efficiency when the system is unloaded or in standby mode.

  • 4.5V to 14V wide input supply voltage range
  • Built-In MOSFET and synchronous rectifier
  • Three 2A buck regulators
    • Parallel operation allows two outputs in parallel for 5A peak output (4A steady state)
  • 0.8V, high accuracy reference (1%)
  • Current-mode control with simple compensation circuit
  • External synchronization
  • Power good
  • Protection
    • Thermal shutdown
    • Overvoltage transient protection
    • Overcurrent protection
  • 32pin TQFN package, 4mm x 4mm
  • Pin-compatible 1MHz version (XR77103-A1R0)
  • Pin-compatible programmable version (XR77103)

  • Low power FPGA and DSP supplies
  • Video processor supplies
  • Home gateways
  • Telecommunications and Infrastructure equipment
  • Industrial control and automation
  • Base stations, switches/routers

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XR77103-A0R5 Universal PMIC 3-Output Buck Regulator REV1D May 2019 1.6 MB
User Guides & Manuals XR77103-A0R5 Evaluation Board Manual R00 March 2022 3.9 MB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Quality & RoHS

Part Number RoHS | Exempt RoHS Halogen Free REACH TSCA MSL Rating / Peak Reflow Package
XR77103ELBTR-A0R5 N Y Y Y Y L2 / 260ᵒC TQFN32 4x4

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement Buy Now Order Samples PDN
XR77103ELB-A0R5 OBS
XR77103ELBTR-A0R5 TQFN32 4x4 -40 125 Active Order
XR77103EVB-A0R5 Board Active
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
TQFN32 4x4
  • JEDEC Reference:
  • MSL Pb-Free: L2 @ 260ᵒC
  • MSL SnPb Eutectic:
  • ThetaJA:
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 490
  • Quantity per Reel: 3000
  • Quantity per Tube:
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 4
  • Width: 4
  • Thickness: 0.8
  • Lead Pitch: 0.4

Notifications

Distribution Date Description File
07/17/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM A: Fixed MBB label logo for DX204001 to MaxLinear logo. ADDENDUM B: Replaced ‘All other affected products outer box label’ with clearer pictures. Corrected Date Issued (from original PCN) issue date +90 days to August 30, 2023.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM: Fixed MBB label logo for DX204001 to MaxLinear logo.