1A Dual Channel USB 3.0 Power Distribution Switch

  • Dual Channel Current Switch
    • 1A continuous load current per channel
    • 1.5A Typical Over-current Limit
    • 2.7V to 6.5V Input Voltage Range
  • USB 2.0 and USB 3.0 Compliant
  • Active High Enable
  • Soft Start
  • Channel Error Flag Indicator
    • 9ms Blanking Time
  • UVLO, Reverse Current, Short circuit and Thermal Shutdown Protection
  • RoHS Compliant, Green/Halogen Free 8-Pin NSOIC Package

  • Self Powered USB 2.0 and 3.0 Hubs
  • USB Compliant VBUS Power Distribution
  • Portable Equipment

The XRP2524 is a dual channel integrated high-side power distribution switch optimized for self or bus-powered USB applications and is compliant with the latest USB 3.0 specification. It accepts an input voltage between 2.7V and 6.5V allowing for operations from industry standard 3.3V and 5V power rails.

The XRP2524 is provided with an enable pin while an error flag is available to indicate fault conditions. With a low quiescent current as well as a small package, the XRP2524 is ideal for battery powered applications. The power-switch rise and fall times are controlled to minimize current surges during turn on/off.

Built-in over current, reverse current and over temperature protections insure safe operations under abnormal operating conditions.

The XRP2524 is offered in a RoHS compliant "green"/halogen free 8-pin NSOIC package.

Part NumberPkg CodeRoHSMin
StatusBuy NowOrder Samples
XRP2524EVBBoardBoard  Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs. 
IQ (µA)80
Vin MAX.(V)6.5
Max Current Per Channel (mA)1000
Technical Assets