XRP7724


DPWM/DPFM Programmable Power Management

Features

  • Four DPWM/DPFM switching buck controllers with
    internal FET drivers
    • Patented Over Sampling control
    • Patented DPFM technology with Ultrasonic mode
  • 4.75V to 5.5V or 5.5V to 25V input voltage range
  • Output voltages programmable from 0.6V to 5.5V
  • 5 GPIOs
    • 3 Load Switch I/O’s (PSIO)
  • Fully programmable via SMBus (I²C)
  • Channel independent programmable switching frequency
    (1X, 2X, 4X)
  • Complete power monitoring and reporting
  • Fully configurable power up and power down sequencing
  • Full Fault Protection Features
  • Internal 5V 50mA standby LDO, with automatic 5V LDO
    bypass switch
  • Internal 3.3V 50mA standby LDO
  • Flash based non-volatile memory for configuration
  • Minimal External Components
  • PowerArchitect™ 5.2 Interactive Design Tool
    for easy configuration
Applications

  • Servers
  • Base Stations
  • Switches/Routers
  • Optical Line Cards
  • Broadcast Equipment
  • Ultrasound Equipment
  • Industrial Control Systems
  • Automatic Test Equipment
  • Video Surveillance Systems
  • Video Conferencing Systems

Benefits:

  • Dynamic power system control
  • Configurable fault management & system monitoring
  • Reduced component count
  • Programmable configurability reduces time to market
  • Configurable and dynamic power conversion optimization
  • Remote monitoring & field serviceability
  • Anti-tampering security
  • Improved reliability with reduced passive components
  • Differentiating product with custom intelligent features
    such as system energy monitoring or product serial traceability
Description

The XRP7724 is a breakthrough Digital PWM/PFM quad output programmable power management system. The XRP7724 is the first digital controller that can be considered for portable or other power sensitive applications due to the significant reduction in operating current. Patented technology allows transient performance equivalent to the fastest comparator based analog technologies ensuring output capacitor size is kept to a minimum. Also included are 3 PSIOs (Power Switch IO) for driving load disconnect MOSFETs, providing another level of Power Management functionality.

The XRP7724 is ready for the next generation of FPGAs and Processors using advanced energy management voltage control by providing output voltage resolution programming as fine as 2.5mV. Each output voltage can be programmed from 0.6V to 5.1V without the need for any external components. The device offers a complete sequencing solution for each buck converter output. Switching frequency is 100kHz to 1.2MHz with the ability to set each channel independently, a useful feature for 2 stage conversion. The wide programmable range of DPWM switching frequency allows for optimization of efficiency and component size.

An SMBus compliant I²C interface is provided to program the device and facilitate communication with the host for: fault reporting and handling, monitoring, voltage repositioning and setting other programmable features.

Part NumberPkg CodeRoHSStatusBuy NowOrder Samples
XRP7724ILBTR-FTQFN44TQFN44Active
XRP7724ILB-FTQFN44TQFN44Active
XRP7724EVB-DEMO-2P-KITKit Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.